GWInstek GOM-80X Instrument Driver Readme

To rate this instrument driver, go to the driver download page on the Instrument Driver Network.

1. Overview

Instrument Driver Technology:

LabVIEW Plug and Play (project-style)

Manufacturer:

GWInstek

Supported Language(s):

LabVIEW

Supported Model(s):

GOM-804,GOM-805

Model(s) Tested:

GOM-805

Interface(s):

USB,GPIB,SERIAL

Firmware Revision(s) Tested:

V1.03 (Support to V1.03 or later)

Certified:

No

NI Supported:

No

Source Code Available:

Yes

Driver Revision:

1.0

Original Release Date:

08/10/2015

Current Revision Date:

08/10/2015

2. Required Software

Some software components need to be installed before using this instrument driver. The minimum versions of these components are listed below, and can be downloaded from the Download Site.

VISA 3.0 or later

For LabVIEW 8.2 and LabVIEW 2009 Refer to the LabVIEW Help for more information about software requirements. You access the LabVIEW Help by selecting Help»Search the LabVIEW Help.

For LabVIEW 2010 or later Refer to the LabVIEW Help for more information about software requirements. You access the LabVIEW Help by selecting Help»LabVIEW Help.

3. Known Issues

To report issues or provide feedback about this instrument driver, please send an email to instrument.drivers@ni.com.

4. Revision History

The latest version of this and other LabVIEW and LabWindows/CVI instrument drivers can be downloaded at the Instrument Driver Network.

REV 1.0, 08/10/2015
Modified by: Lionel Chen.
Original release.